JVC XL-R5010BKC User Manual

31
English English
Setting the START or START&STOP function for
synchronized recording from an external source
If the signal is going be recorded from CD, MD or DAT player, it is
possible to set the unit to perform synchronized start and stop. This
only applies for recording sources that are connected to the DIGI-
TAL IN (DIGITAL IN OPTICAL) terminal. With other types of dig-
ital audio equipment only synchronized start of recording is possible.
1
With the unit in the stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG control or press the
2
/
3
(menu) button on the remote control until “D-IN
SYNCHRO” is shown in the information display.
3
Press the SET button (main unit/remote
control).
• The current setting is shown in the information display.
4
Turn the MULTI JOG control or press the
2
/
3
(menu) button on the remote control to select
“START” or “START&STOP”, shown in the
information display.
• When “START” is selected, only the start of recording is done
synchronously with the start of the digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
• The type of synchronized recording being performed is not indi-
cated in the information display during actual recording. When
recording is started, only the SYNCHRO indicator is shown in
the display window until recording ends.
• If the setting is set to “START&STOP”, recording stops auto-
matically when the signal from the source is stopped, a disc is
changed, or if a track search is performed.
• This function is very convenient for recording single songs from
external digital CD or MD players.
• This function is only for use with externally connected digital
audio equipment. It cannot be used with the 3-CD changer.
CAUTION
When performing synchronized start recording from an external
component, it is possible that part of the signal at the beginning of
the first track will not be recorded. If this should occur, please per-
form manual recording.
1
Load a recordable CD-R or CD-RW in the CDR
disc tray.
• The disc is read.
2
Press the REC SOURCE SELECTOR button on
the main unit or the REC SOURCE button on the
remote control to select the recording source
combination.
Example
CD + LINE has been selected.
STANDBY
STANDBY/ON
PLAY & EXCHANGE
3
-
CD
MAXMIN
PHONES
PLAY MODE
PHONES LEVEL
EJECT
REC SOURCE SELECTOR
MIX BLANCE
CD
LINE
LINE
MIC
MULTI JOG
REC LEVEL
+
–
MIC
CANCELSETMENU
PAUSE
REC/
REC MUTING
PLAYSTOP
SYNCHRO
CD EDIT CD REC
STOP PLAY PAUSE
FINALIZE
MICLINECDDIGITAL
3,5
1
2,4
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
1
3,5
2,4
Mixed Input Recording
STANDBY
STANDBY/ON
PLAY & EXCHANGE
3
-
CD
MAXMIN
PHONES
PLAY MODE
PHONES LEVEL
EJECT
REC SOURCE SELECTOR
MIX BLANCE
CD
LINE
LINE
MIC
MULTI JOG
REC LEVEL
+
–
MIC
CANCELSETMENU
PAUSE
REC/
REC MUTING
PLAYSTOP
SYNCHRO
CD EDIT CD REC
STOP PLAY PAUSE
FINALIZE
MICLINECDDIGITAL
6 45
125
3
4
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
2
4
3
5
6
4
MICLINECD
(To be continued on the next page)
XL-R5010BK.book Page 31 Monday, June 4, 2001 11:40 AM

JVC XL-R5010BKC Specifications

Power

power requirements	120V, 60Hz
power consumption (power ON mode)	40W
power consumption (STANDBY mode)	5W

Output Terminals

analog output	2V/5kΩ
headphones output	4mW/32Ω
digital optical output	–21dBm - –15 dBm

Weight and Dimensions

dimensions (W x H x D)	435mm x 127mm x 334mm
mass	6.3kg