JVC XL-R5010BKC User Manual

33
English English
Special Recording Edit Operations
Occasionally, there may be tracks on a disc that are partial,
repeated, or are otherwise unwanted. Before a CD-R or CD-RW is
finalized, it is possible to enter a skip marker for that track in the
PMA (Program Memory Area). A maximum of 21 skip marks can
be inserted on one disc. When a disc is finalized, the information of
tracks assigned a skip mark is written to the disc’s TOC (Table of
Contents) and those tracks will never be played (i.e., just as if they
had never been recorded.)
Caution
Once a skip marker has been entered for a track, it can-
not be removed.
1
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
2
Turn the MULTI JOG control or press the
2
(menu) button on the remote control until
“TRACK SKIP” is shown in the information
display.
3
Press the SET button (main unit/remote
control).
•“SKIP (track number)?” is shown in the information display.
• Press the CANCEL button (main unit/remote control) if you do
not wish to perform this procedure.
4
Turn the MULTI JOG control or press the
2
/
3
(menu) button on the remote control to select
the track number to be skipped.
5
Press the Set button (main unit/remote control).
• A skip marker is entered into the PMA for the selected track and
WRITE SKIP is shown in the information display. When the
process is finished, the normal display is shown.
• The track to be skipped is cleared from the music calendar.
Notes
• Even if a track is skipped, the recorded information is not erased
and the time remaining on the CD-R or CD-RW does not
change.
• Tracks that have been assigned a skip marker are only skipped
during playback on this unit and other CD players that support
the track skip function.
• You cannot use the track skip function when recording to unfi-
nalized CD-R discs or CD-RW discs from the 3-CD changer.
1
Load the unfinalized CD-RW to be edited in the
CDR disc tray.
• The number of tracks and play time are shown in the informa-
tion display.
2
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
3
Turn the MULTI JOG control or press the
2
/
3
(menu) button on the remote control until
“TRACK ERASE” is shown in the information
display.
*Please refer to the Glossary for a brief definition of acronyms.
(see page 46)
Skipping a Recorded Track on a
CD-R or CD-RW (Track Skip)
STANDBY
STANDBY/ON
PLAY & EXCHANGE
3
-
CD
MAXMIN
PHONES
PLAY MODE
PHONES LEVEL
EJECT
REC SOURCE SELECTOR
MIX BLANCE
CD
LINE
LINE
MIC
MULTI JOG
REC LEVEL
+
–
MIC
CANCELSETMENU
PAUSE
REC/
REC MUTING
PLAYSTOP
SYNCHRO
CD EDIT CD REC
STOP PLAY PAUSE
FINALIZE
MICLINECDDIGITAL
3,5
2,4
1
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
2,4
3,5
1
CANCEL
CANCEL
Erasing a Track or Tracks
(Erase Function) (CD-RW only)
STANDBY
STANDBY/ON
PLAY & EXCHANGE
3
-
CD
MAXMIN
PHONES
PLAY MODE
PHONES LEVEL
EJECT
REC SOURCE SELECTOR
MIX BLANCE
CD
LINE
LINE
MIC
MULTI JOG
REC LEVEL
+
–
MIC
CANCELSETMENU
PAUSE
REC/
REC MUTING
PLAYSTOP
SYNCHRO
CD EDIT CD REC
STOP PLAY PAUSE
FINALIZE
MICLINECDDIGITAL
2 4,6
3,5
1
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
3,5
4,6
2
CANCEL
(To be continued on the next page)
XL-R5010BK.book Page 33 Monday, June 4, 2001 11:40 AM

JVC XL-R5010BKC Specifications

Power

power requirements	120V, 60Hz
power consumption (power ON mode)	40W
power consumption (STANDBY mode)	5W

Output Terminals

analog output	2V/5kΩ
headphones output	4mW/32Ω
digital optical output	–21dBm - –15 dBm

Weight and Dimensions

dimensions (W x H x D)	435mm x 127mm x 334mm
mass	6.3kg