14
English
English
CD playback can be started from a specific track by pressing the
corresponding number button(s) on the remote control.
1
Press the CD and CDR Deck Selection button
corresponding to the tray holding the CD and
track to be played.
2
Press the number button(s) of the track you
want to play.
The track number corresponding to the buttons pressed is shown in
the information display, and playback of that track starts.
To select tracks 1 through 10
Press the number button (1 through 10) corresponding to the track.
To select tracks 11 or above
First press the +10 button, and then press one of the number but-
tons 1 through 10.
Example: Track 15
Press +10 followed by 5.
Example: Track 20
Press +10 followed by 10.
Direct Track Selection (selecting another track during
playback)
Press the number button(s) corresponding to the track to be played
(Step 2). The display will change to indicate the corresponding
track number, playback of the current track will stop and playback
of the newly selected track will begin.
• To select a track on a CD in another tray, repeat steps 1 and 2.
• Direct track selection cannot be initiated by pressing the +10
button alone: this button must be used in combination with one
of the other number buttons (1 through 10). This function is not
possible when either program or random play mode is in use.
The 1 (reverse) and ¡ (forward) buttons on the remote control
can be used to find a particular location on the CD being played.
1
Press the CD and CDR Deck Selection button
(CD or CDR) corresponding to the tray holding
the CD currently playing.
2
Press the 1 (reverse) or ¡ (forward) button
corresponding to the direction you want search.
Release the button when you find the location
you want to play.
• If playback is paused when a search is performed, there is no
sound heard during the search. When the search is complete the
pause mode is resumed.
• When forward or reverse searching is performed during play-
back of an unfinalized disc, the information display and/or the
search function may not operate properly depending on the type
of disc being played.
Direct Playback of a Specific
Track
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A
REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
2
1
1
CD CDR
CONTROLCONTROL
For a CD in the 3-CD changer
For a CD in the CDR
CD
CON
CD1 CD2 CD3
CONTROL
CDR
Forward and Reverse Search
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
PITCH
+
SET
PITCH–
RM
–
SXLR5010A
REMOTE CONTROL
1/¡
Reverse
search
Forward
search
XL-R5010BK.book Page 14 Monday, June 4, 2001 11:40 AM
To Next Page
Loading...
Need help?
Power
Output Terminals
Weight and Dimensions
