48
English
English
Main Specifications
The unit’s specifications and exterior are subject to change without
notice due to improvements.
CD Player Section
System Compact disc digital audio system
Pitch control ±12%
Signal-to-noise ratio 97dB
Dynamic range (1 kHz) 93dB
Frequency response 20 - 20kHz
Wow and flutter Less than measurable limit
Total harmonic distortion 0.0063%
CDR Section
System Compact disc digital audio recording
system
Sampling frequency 44.1kHz
Frequency response 20 - 20kHz
Inputs: Analog (LINE IN) Minimum input level: 300mV
(Full scale –12dB)/50kΩ
Digital (optical) Input level: –23dBm - –15dBm
(With sampling rates 32kHz, 44.1kHz,
48kHz)
Microphone Minimum input level: 3mV (Full scale
–12dB)/600Ω - 10kΩ matching imped-
ance
Signal-to-noise ratio 94dB (during playback)
Dynamic range (1 kHz) 91dB (during playback)
Wow and flutter Less than measurable limit
Total harmonic distortion 0.0063% (during playback)
Timer Section
Timer system DAILY TIMER operation (ON/OFF
timer)
ONCE TIMER operation (ON/OFF
timer)
Clock display 12-hour display
Common Specifications
Output terminals:
Analog LINE x 1 set, 2V/5kΩ (Full scale)
Headphones x 1, 4mW/32Ω,
8Ω ~ 1kΩ matching impedance
Digital OPTICAL x 1, –21dBm - –15 dBm
COAXIAL x 1
Other terminals COMPU LINK-4/SYNCHRO x 2
Power requirements 120V , 60Hz
Power consumption 40W power ON mode
5W STANDBY mode
Dimensions (W x H x D) 435mm x 127mm x 334mm
(17-3/16in. x 5in. x 13-3/16in.)
Mass Approx. 6.3kg (13.9lbs)
Accessories
Remote control RM-SXLR5010A x 1
Batteries AA (15F), R6, SUM-3
dry batteries x 2
(to check operation of remote control)
Pin cables x 2
COMPU LINK-4 cable x 1
XL-R5010BK.book Page 48 Monday, June 4, 2001 11:40 AM
To Previous Page
Loading...
Need help?
Power
Output Terminals
Weight and Dimensions
