26
English
English
“DISC DUBBING?” is shown in the information display.
• When a blank disc is in the CDR tray, “UPDATE OPC” is
shown following “DISC DUBBING”.
The 3-CD changer and CDR start simultaneously.
• Recording starts from the first track of the CD.
When recording completes, “STOP DUBBING” flashes and
recording automatically stops.
Notes
• Recording can only start if the total time of the tracks on the
source disc is less than the time remaining on the disc being
recorded to. If the track time on the source disc is longer, the
message “SHORT REMAIN” is shown in the information dis-
play and the dubbing function is ended.
• If a track on the source disc is of SCMS format, the message
“SCMS PROTECT” is shown in the information display, and
the dubbing function is ended.
• Do not finalize the disc.
Selected tracks can be programmed and recorded.
1
Select and stop the CD to be recorded.
2
Load a recordable CD-R or CD-RW in the CDR
tray.
• The disc is read.
3
Press the CD EDIT button (main unit/remote
control) to select the Listening Edit mode.
“LISTEN EDIT” is shown in the information display for 3 seconds,
the LISTENING EDIT edit recording indicator is shown in the dis-
play window.
• The CD trays of the 3-CD changer cannot be opened once the
listening edit mode is activated.
• If tracks have already been programmed for the CDs, “LAST L-
PG OK?” is shown in the information display. Press the SET
button on either the remote control or the main unit or press the
PLAY button on the main unit to record the same programmed
tracks.
Recording starts.
To program new tracks, press the CANCEL button and then
proceed to step 4.
4
Program the tracks while the CD is playing by
assigning a tag to each track on the disc.
• This is done by pressing either the SET button (main unit/
remote control) to add the track to the program or the CANCEL
button (main unit/remote control) to skip the track.
a. When the track now playing is to be recorded
b. When the track is not to be recorded
When the first track has been stored in memory
After making the last programming choice, “START TO DUB?” is
shown in the information display. Press the SET button (main unit/
remote control) to continue or the CANCEL button (main unit/
remote control) to end the function.
Note
• Up to 32 steps can be included in the programming. The same
track cannot be programmed twice.
When there is not much recording time left on the CD-R or CD-
RW disc, tracks that are longer than the remaining time (pre-cal-
culated) can be programmed but “NO REM” is shown in the
information display.
5
Press the CDR Control PLAY 3 or ¶ REC/REC
MUTING button on the main unit or the 3 (play)
or ¶ REC/REC MUTING button on the remote
control. Recording of the selected songs will
begin.
“START TO DUB?” is shown in the information display
Listening Edit Recording
STANDBY
STANDBY/ON
PLAY & EXCHANGE
3
-
CD
MAXMIN
PHONES
PLAY MODE
PHONES LEVEL
EJECT
REC SOURCE SELECTOR
MIX BLANCE
CD
LINE
LINE
MIC
MULTI JOG
REC LEVEL
+
–
MIC
CANCELSETMENU
PAUSE
REC/
REC MUTING
PLAYSTOP
SYNCHRO
CD EDIT CD REC
STOP PLAY PAUSE
FINALIZE
MICLINECDDIGITAL
1
4
3
1
2
5
CANCEL
STANDBY/ON
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTING
R
E
C
S
O
U
R
C
E
M
E
N
U
P
IT
C
H
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR5010A
REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
1
1
4
3
5
CANCEL
CD EDIT
CD EDIT
Remote ControlMain Unit
The track is stored in the memory, and
operation moves on to the next track.
SET
CANCEL
The track is not stored in the memory,
and operation moves on to the next
track.
CD PLAYER
CD REC
2345
678910
LISTENING EDIT
SYNCHRO
HIGH SPEED AUTO TRACK
DIGITAL
CD-R
44.1kHz
REC
L
R
–
40 30 20 15 10 dB630
Play time of second track
Recording time remaining on the
CD-R/RW disc(pre-calculated)
“1” is cleared from the music calendar.
XL-R5010BK.book Page 26 Monday, June 4, 2001 11:40 AM
To Next Page
Loading...
Need help?
Power
Output Terminals
Weight and Dimensions
