TECHNICAL DESCRIPTION Kamstrup 162M/382M
5512-1040 GB/05.2012/Rev. C1
20
The registration interval follows the integration period, and the integration period can be changed after the
commissioning.
IMPORTANT: If the integration period is changed, the load profile logger is deleted.
The logging depth of the load profile depends on the configuration of energy type and integration period for the
meter.
Integration period
Table 5: Logging depth of load profile logger.
The logging depth of the load profile logger is pre-configured to 130 days when the integration period is 15, 30 or
60 min. The logging depth of 130 days is, however, a default setting which subsequently can be changed via
system upgrade. The remaining part of the memory is dedicated to an integrated analysis logger. Furthermore, the
load profile logger can be read out on the meter display as described in section 4.11.
To Next Page
Loading...
Need help?
General
