Kamstrup 162M User Manual

TECHNICAL DESCRIPTION Kamstrup 162M/382M
5512-1040 GB/05.2012/Rev. C1
9
2.3 Meter types
Kamstrup’s direct meters are available in different variants depending on the application for which they are used.
As default, in addition to many other functions, the meters are provided with debiting logger, event loggers,
voltage quality measurement, tamper detection, and the possibility of using up to 8 tariffs. Furthermore, the
meters can be supplied from the factory with internal disconnect function for disconnection and connection of the
consumer’s supply, configured for the measurement of energy types in all 4 quadrants, with integrated radio
transceiver, load profile logger, prepayment function, APS and smart disconnect.
The summary below provides an overview of which functions the meter types include.
The meter's type number consists of 13 characters that describe the meter's hardware and mechanics:
684-XXX-XX-XX-XXX for the 3-phase meter and 686-XXX-XX-XX-XXX for the 1-phase meter.
Kamstrup 3-phase Direct meter is a 3-phase 4-wire meter, 684-3XX-XX-XX-XXX.
Kamstrup Aron Direct meter is a 3-phase 3-wire meter, 684-2XX-XX-XX-XXX.
Kamstrup 1-phase Direct meter is a 1-phase 2-wire meter, 686-1XX-XX-XX-XXX.
Meter Type 1-phase Aron 3-phase
Without
APS
Without
APS
With
APS
Without
APS
Without
Radio
Without breaker
   
With breaker

  
Kamstrup
Radio
Without breaker
   
With breaker

  
Table 1: Meter variants - hardware.

Kamstrup 162M Specifications

General

Brand	Kamstrup
Model	162M
Category	Measuring Instruments
Language	English