Kamstrup 162M User Manual

TECHNICAL DESCRIPTION Kamstrup 162M/382M
5512-1040 GB/05.2012/Rev. C1
55
10.2 Configuration numbers
By and large the configuration numbers reflect the meter’s configuration.
Variables A and B are locked from the factory, i.e. they cannot be changed after verification.
10.2.1 Configuration 1 ( A-B-CCC-DD-E )
A Decimals displayed (locked)
B LED configuration (locked)
CCC Primary module
DD Input/output configuration of the primary module port
E Integration period
The DD code describes the function of the two module ports. The ports can be configured for inputs and outputs if
required. The choices are described shortly in the below table under DD.
A
-
B
-
CCC
- DD -
E
A Decimals in display
7.0 1
6.1 2
B LED configuration
LED switched off without consumption
1
LED switched on without consumption
2
CCC Module
No module
000
S0 supply module
001
Data/pulse module
003
T
ariff module, 4-tariff, 230V, CS
018
Senea input/output
021
IP101i, TCP/IP module
040
GSM6i, GSM6i/RF, GSM7i, GSM8i
053
NURI ZigBee
056
LON module
057
Load control module 5A
058
NURI GPRS
060
Z-wave
063
Wireless M-Bus module, OMS
064
M-Bus
068
Load control module 2*5A
069
Radio module, high power
070
RS-485
072

Kamstrup 162M Specifications

General

Brand	Kamstrup
Model	162M
Category	Measuring Instruments
Language	English