KaVo OP 3D Vision User Manual

3-4
KaVo OP 3D Vision Service Manual
032-0358-EN Rev B
Restore Files
1. Install USB-connected device
containing the files to be restored
to a USB port on the scanner
controller.
2. Select Backup & Restore from
menu.
3. Select backup job to be restored
from left side of window.
4. Press Restore.
5. On Restore Wizard, ensure the
following defaults are selected:
• Use original location
• Restore the latest version of
all files
6. Press Finish. Restore begins.
You may be prompted to confirm
overwriting of files.
NOTE: The duration of the restore
operation will vary depending on
the amount of data being restored.
7. A progress bar is displayed at the
bottom of the window. When
complete, select View -> Job Logs
-> Last Restore Log view a log of
the restore operation.
NOTE: If any errors are encountered during the restore, a pop-up displays with an option to view
the log file.
8. Un-install USB-connected device.
Backup and Restore User Account Data
Currently, the only way to backup user accounts that have been added by the site is to manually copy
the account names and then recreate the accounts after the operating environment has been restored.
Recreated accounts will have to be assigned default passwords, that can later be changed to a
password selected by the user.

KaVo OP 3D Vision Specifications

General

Brand	KaVo
Model	OP 3D Vision
Category	Dental equipment
Language	English