KEB COMBIVERT F4-F Applications Manual

9
ANTRIEBSTECHNIK
1
19
21.06.99KEB COMBIVERT F4-F
Name: Basis
1
Introduction
General
© KEB Antriebstechnik, 1999
All Rights reserved
Chapter Section PageDate
6.3.18 Output Terminal Status (ru.15) .......................................... 6.3.15
6.3.19 Used Parameters............................................................... 6.3.16
6.4 Set Value and Ramp Adjustment....................................................... 6.4.3
6.4.1 Brief Description .................................................................. 6.4.3
6.4.2 AUX-Function, Setpoint and Rotation Selection .................. 6.4.4
6.4.3 Setpoint Limits ..................................................................... 6.4.7
6.4.4 Setpoint Calculation ............................................................ 6.4.8
6.4.5 Ramp Generator................................................................ 6.4.10
6.4.6 Used Parameters............................................................... 6.4.13
6.5 Motor Data and Controller Adjustment ............................................ 6.5.3
6.5.1 Motor Name Plate ............................................................... 6.5.3
6.5.2 Motor Data from Name Plate (dr.0...dr.4, dr.12) .................. 6.5.3
6.5.3 Motor Adaption (Fr.10)......................................................... 6.5.4
6.5.4 Controller Activation (CS.23) ............................................... 6.5.5
6.5.5 U/f-Characteristic................................................................. 6.5.6
6.5.6 Corner Speed / Field Weakening (dr.19) ............................. 6.5.6
6.5.7 Boost (dS.11) ...................................................................... 6.5.6
6.5.8 Output Voltage Stabilization (dS.10) .................................... 6.5.6
6.5.9 Modulation Rate (dS.12) and Overmodulation (dS.14) ....... 6.5.8
6.5.10 Operating Frequency (dS.13) .............................................. 6.5.8
6.5.11 Controller Structure ............................................................. 6.5.9
6.5.12 Current Control (Torque Control) ......................................... 6.5.9
6.5.13 Speed Control ................................................................... 6.5.10
6.5.14 Torque Limitation ............................................................... 6.5.11
6.5.15 Flux Lowering Calculation ................................................. 6.5.12
6.5.16 Flux Control/Max. Voltage Control ..................................... 6.5.12
6.5.17 Motor Parameter Adaption ................................................ 6.5.13
6.5.18 Torque Control ................................................................... 6.5.15
6.5.19 Used Parameters............................................................... 6.5.17
6.6 Keep on Running Functions.............................................................. 6.6.3
6.6.1 Thermal Motor Protection .................................................... 6.6.3
6.6.2 Thermal Inverter Protection ................................................. 6.6.3
6.6.3 External Error Control Procedure ........................................ 6.6.4
6.6.4 Automatic Restart and Speed Search ................................. 6.6.5
6.6.5 Used Parameters................................................................. 6.6.6
6.7 Parameter Sets ................................................................................... 6.7.3
6.7.1 Non-programmable Parameters .......................................... 6.7.3
6.7.2 Copying of Parameter Sets (Fr.0, Fr.1, Fr.9) ........................ 6.7.3
6.7.3 Selection of Parameter Sets ................................................ 6.7.4
6.7.4 Locking of Parameter Sets .................................................. 6.7.6
6.7.5 Parameter Set ON and OFF Delay (Fr.5, Fr.6) ................... 6.7.7
6.7.6 Used Parameters................................................................. 6.7.7
6.8 Special Functions .............................................................................. 6.8.3
6.8.1 Brake Control ...................................................................... 6.8.3
6.8.2 Adjustment Assistant ........................................................... 6.8.7

KEB COMBIVERT F4-F Specifications

General

Brand	KEB
Model	COMBIVERT F4-F
Category	Lifting Systems
Language	English