Recall
Perform the following steps to view stored readings and buffer statistics:
1. Press RECALL. The BUFFER annunciator turns on to indicate that stored readings are
being displayed. The arrow annunciator (↔) also turns on to indicate that additional data
is available for viewing.
2. As shown in Figure 6-1, use the RANGE and keys, and the cursor and keys
to navigate through the reading numbers, reading values, and buffer statistics. For any of
the buffer statistics (maximum, minimum, peak-to-peak, average, standard deviation),
the STAT annunciator is on.
3. To return to the normal display, press EXIT.
Figure 6-1
Buffer locations
RDG NO. 10 Reading Value
RDG NO. 9 Reading Value
RDG NO. 8 Reading Value
RDG NO. 7 Reading Value
RDG NO. 6 Reading Value
RDG NO. 5 Reading Value
RDG NO. 4 Reading Value
RDG NO. 3 Reading Value
RDG NO. 2 Reading Value
RDG NO. 1 Reading Value
STD DEV Standard Deviation Value
Average Average Value
Peak-toPeak Peak-to-Peak Value
Min At XX Minimum Value
Max At XX Maximum Value
RANGE
RANGE
Buffer 6-3
To Next Page
Loading...
