(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
Macro information.
Response to *IDN (identification).
Storage area for *PUD and *PUD?
Resource description for *RDT and *RDT?
Effects of *RST, *RCL and *SAV.
*TST information.
Status register structure.
Sequential or overlapped commands.
Operation complete messages.
Not applicable.
See “Common Commands” in Section 12.
Not applicable.
Not applicable.
See “Common Commands” in Section 12.
See “Common Commands” in Section 12.
See Status Structure in Section 11.
All are sequential except :INIT and
:INIT:CONT ON, which are overlapped.
*OPC, *OPC? and *WAI; see “Common
Commands” in Section 12.
Table G-2
Coupled commands
Command Also changes To
:TRAC:POIN
:TRAC:CLE
:TRAC:FEED:CONT
:TRAC:FEED:CONT
NEV
NEV
Sense Subsystem Commands:
...:RANG:UPP
...:REF:ACQ
...:RANG:AUTO
...:REF
OFF
presently displayed reading
:SENS:VOLT:DC:RAT ON :SENS:VOLT:DC:DELT
:SENS:HOLD:STAT
OFF
OFF
:SENS:VOLT:DC:DELT ON :SENS:VOLT:DC:RAT
:SENS:HOLD:STAT
:SENS:VOLT:DC:CHAN1:DFILT:TCON REP
OFF
OFF
MOV
... = Valid function command words (i.e., :VOLT:DC, :VOLT:AC, etc.)
Table G-1 (cont.)
IEEE-488 documentation requirements
Requirements Description or reference
IEEE-488 and SCPI Conformance Information G-3
To Next Page
Loading...
