Keithley 2182 User Manual

Setting limit values
Use the following steps to enter high and low limit values:
1. Press the Limits VALUE key to view the present HI1 limit value:
HI1:+1.000000 ^ (default)
2. To change the HI1 limit, use the cursor keys ( and ) and the manual range keys
(and ) to display the desired value. Move the cursor to the rightmost position (^) and
use the (and ) keys to move the decimal point. Note that with the cursor on the
polarity sign, pressing or  toggles the polarity of the value.
3. Press ENTER to view the present LO1 limit value:
LO1:–1.000000 ^ (default)
4. Enter the desired value for this low limit.
5. Press ENTER to view the present HI2 limit value:
HI2:+2.000000 ^ (default)
6. Enter the desired value for this high limit.
7. Press ENTER to view the present LO2 limit value:
LO2:–2.000000 ^ (default)
8. Enter the desired value for this low limit and press ENTER to return to the normal
display.
Enabling limits
Use the following procedure to turn on the limits operation:
1. Press the Limits ON/OFF key to view the present beeper status:
BEEP: NEVER (default)
2. To change the beeper setting, use the and  keys to display NEVER, OUTSIDE, or
INSIDE.
3. Press ENTER to return to the normal display. The HI/IN/LO status is displayed along
with the reading.
4. To disable Limits, press the ON/OFF key.
8-4 Limits

Keithley 2182 Specifications

General

Brand	Keithley
Model	2182
Category	Measuring Instruments
Language	English