Keithley 2182 User Manual

Model 182 Emulation Commands D-3
K2 Enable EOI, disable bus hold-off on X
K3 Disable EOI, disable bus hold-off on X
Save/Recall Setup L0 Save current setup as power-on
L1 Recall factory default setup
L2 Recall power-on setup
SRQ Mask M0 Disable SRQ
M1 Reading done
M2 Buffer half full
M4 Buffer full
M8 Reading overflow
M16 Ready for command
M32 Error
M128 Ready for trigger
Enable/Disable N0 Enable Filter
Filter N1 Disable Filter
Analog Filter O0 Configure analog filter off
Configuration O1 Configure analog filter on
Digital Filter P0 Configure digital filter off
Configuration P1 Configure fast response
P2 Configure medium response
P3 Configure slow response
Trigger Interval Qvalue Interval = value in msec (10 to 999999msec)
Range R0 Enable auto-range
R1 10mV range
R2 100mV range
R3 1V range
R4 10V range
R5 100V range
R6 NO-OP (no operation)
R7 NO-OP
R8 Disable auto-range
Integration Period S0 Line cycle integration period 7
S1 3msec integration period
S2 100msec integration period
S3 1 second integration period
Trigger Mode T0 Multiple on talk 8
T1 One-shot on talk
T2 Multiple on GET
T3 One-shot on GET
Table D-1
Model 182 device-dependent command summary (cont’d)
Mode Command Description Note

Keithley 2182 Specifications

General

Brand	Keithley
Model	2182
Category	Measuring Instruments
Language	English