Model 6220/6221 Reference Manual SCPI Reference Tables 14-15
Return to Section 14 topics
:KEY? Query last pressed key.
:KCLick <b> Enable or disable key-click. ON 1
:KCLick? Query state of key-click.
:BEEPer Beeper:
:STATe <b> Enable or disable beeper. ON 1
:STATe? Query state of beeper.
:PRES‘et Return 622x to PRESET default setup. 1
:POSetup <name> Select power-on setup: RST, PRESet, SAV0,
SAV1, SAV2, SAV3, or SAV4.
1
:POSetup? Query power-on setup.
:ERRor? Query the latest error code and message. 11
:CLEar Clears error code and message from Error
Queue.
11
:TSTamp System timestamp: 13
:RESet Reset timestamp to zero seconds.
:RNUMber System reading number: 13
:RESet Reset reading number to zero.
:VERSion? Query revision level of SCPI standard.
:ABOard Analog board: 1
:SNUMber? Query serial number of analog board.
:REVision? Query revision level of analog board.
:DBOard Digital board: 1
:SNUMber? Query serial number of digital board.
:REVision? Query revision level of digital board.
:PASSword Password: 10
:ENABle <b> Enable or disable the use of password.
:ENABle? Query state of password usage.
:CDISable <string> Disables protected commands.
<string> = “password”.
[:CENable] <string> Enables protected commands.
<string> = “password”.
:STATe? Query state of password: Returns “0” if
password protected commands are disabled.
Returns “1” if enabled.
:NEW <string> Set new password.
<string> = “password”.
Table 14-8 (cont.)
System command summary
Command Description Default Sec SCPI
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
