Need help?Do you have a question about the KERN CFS and is the answer not in the manual?
General| Plate material | stainless steel |
|---|---|
| Readability | 0.01 g |
| Reproducibility | 0.01g |
| Calibration | External calibration |
| Display | LCD |
| Weighing units | g, lb, oz |
| Operating temperature | 10 °C - 40 °C |
| Functions | counting, weighing |
| Interface | RS-232 |
Detailed specifications for KERN CFS models, including readability, weighing range, and connectivity.
Official statement confirming KERN CFS compliance with EU directives and standards.
Guidelines on correct usage, prohibited actions, and potential damage to the balance.
Details about warranty conditions and monitoring of testing resources for accuracy.
Emphasizes manual reading and notes that only trained personnel should operate the appliance.
Instructions for checking the appliance upon receipt and for return transport packaging.
Guidelines for site selection, unpacking, and initial setup of the balance.
Instructions for removing or engaging the transport guard, particularly on 6 kg models.
Identifies key components of KERN CFS counting balances with numbered diagrams.
Identifies key components of KERN CFS 50K-3 balances with numbered diagrams.
Describes setting up KERN CCS counting systems and connecting weighing bridges.
Lists items included in the delivery for KERN CFS and KERN CCS models.
Illustrates display sections for weight, average piece weight, and quantity for different CFS models.
Explains symbols and data shown for weight and average piece weight displays.
Explains symbols related to quantity display and tolerance control in counting mode.
Details the functions of each key in weighing and menu modes for CFS models.
Explains the operation of numeric, unit, tare, and zeroing keys.
Details the functions of each key in weighing and menu modes for CFS 50K-3 models.
Explains functions of tolerance, memory, and balance switching keys for CFS 50K-3.
Information on mains connection, rechargeable battery charging, and status indicators.
Guidelines for connecting peripherals and the initial commissioning process.
Step-by-step guide for adjusting reference balances, including password entry.
Step-by-step guide for adjusting CFS 50K-3 reference balances, including password entry.
Guide for adjusting bulk material scales not pre-configured by KERN.
Guide for adjusting CFS 50K-3 bulk material scales not pre-configured by KERN.
Instructions for linearising CFS 3K-5 to 30K0.5 models to correct linearity deviations.
Table listing linearization points (weights) for CFS 3K-5 to 30K0.5 models.
Instructions for linearising CFS 50K-3 models to correct linearity deviations.
Table listing linearization points (weights) for CFS 50K-3 models.
Procedures for powering the balance on/off and performing zeroing operations.
How to switch between the reference balance and the weighing bridge in a counting system.
Shows how the display indicates selection between KERN CFS and KERN KFP balances.
Detailed steps for taring a weighing vessel and numerically entering tare weight.
How to manually add weighing values into the summation memory for totalization.
Steps for adding weighing goods, viewing saved data, and deleting it.
Procedures for adding weighing goods for CFS 50K-3 models, including repetition limits.
How to view and delete saved weighing data for CFS 50K-3 models.
Explains the meaning of labels in a typical printout from the balance.
How the balance automatically adds weighing values to the summation memory.
Explains the importance of average piece weight for accurate counting and its determination.
Steps to set a reference and count items using the average piece weight method.
Steps to set a reference and count items for CFS 50K-3 models.
How to manually input average piece weight and use automatic reference optimization.
Guide to using KERN CFS and KFP balances in a counting system setup.
How to set and use upper and lower thresholds for weighing mode tolerance control.
Explains the meaning of the tolerance mark in weighing mode for CFS 3K-5 to 30K0.5.
Explains the meaning of the tolerance mark in weighing mode for CFS 50K-3.
How to set upper and lower item limits for tolerance control in counting mode.
Explains the meaning of the tolerance mark in counting mode for CFS 3K-5 to 30K0.5.
Explains the meaning of the tolerance mark in counting mode for CFS 50K-3.
How to delete tolerance limit values and store data in indirect memories.
Steps for inputting memory locations, product names, and additional text.
Overview of keyboard character assignments for data input and output.
Procedures for storing data, product names, and text for CFS 50K-3 models.
Overview of keyboard character assignments for CFS 50K-3 data entry.
How to retrieve stored tare values, product names, and average piece weights.
How to retrieve stored tare values, product names, and average piece weights for CFS 50K-3.
Shows an example printout and explains the labels for saved data.
Steps for saving product names and unit weights into indirect memory locations.
How to retrieve saved product names and unit weights from memory.
Guide to entering the menu, selecting blocks, items, and settings.
Lists menu blocks, items, available settings, and their explanations for CFS 3K-5 to 30K0.5.
Lists menu blocks, items, and settings for CFS 50K-3 models.
Details interface settings like parity, baud rate, and printer types.
Technical specifications and configuration parameters for bulk material balances.
Steps for configuring the balance, selecting units, and password management.
How to navigate menus, select parameters like internal resolution and readability.
Configuration of zero setting range and password input for menu access.
Navigating and setting parameters like resolution and automatic zero point correction.
Setting zero range and managing passwords for CFS 50K-3 models.
Navigating and setting parameters like resolution and capacity for bulk material scales.
Setting zero range and managing passwords for bulk material scales.
Pin assignment for connecting a weighing bridge via the second balance interface.
Information on RS 232C interface, data exchange, and required cable connections.
Details pin allocation for CFS models and technical specifications for RS 232C interface.
Lists commands for remote control operations and data printing.
Procedures for cleaning, authorized maintenance, and proper disposal of the appliance.
Lists common faults like non-glowing display and changing weights, with their potential causes.
Explains specific error messages like 'Err 4', 'Err 5', 'Err 6', and adjustment errors.
To Next Page
