TPES-B_TPEJ-B-BA-e-2319 26
9 Basic Operation
9.1 Turn on/off
Start-up:
The software version appears on the
display. After disconnection from mains
the weighing system PEJ performs an
internal adjustment.
Wait until the weight display appears
The display shows zero
The balance is now ready for weighing
Touch slightly the weighing plate to check
whether the displayed weighing value in
the display is changing
• After switching on, the balance always starts with the last weighing
application that was used before switching off.
• The weighing system PEJ carries out an internal adjustment when
having been disconnected from mains before switching-on
To Next Page
Loading...
