KERN PES 620-3M

69 TPES-B_TPEJ-B-BA-e-2319
 Place the adjustment weight centrally on
the weighing plate.
 Various messages are shown on the
display one after another: <buSy> →
<End>
 The balance returns to weighing mode
 Unload weighing plate
17.4 Adjustment test with external weight
• Cancel the process by pressing the [PRINT] key
 Unload weighing plate
 Select <7. CA. 4> in the menu (navigation
in the menu: see chapter 8.3)
 Press the [S] key
 The balance returns to weighing mode
 Press the [CAL] key to start internal
adjustment test.
 The balance performs an automatic zero
setting
…