65 TPES-B_TPEJ-B-BA-e-2319
<0 mg> is displayed and flashes
Enter measurement incertainty in mg
(numeric input: see chap. 3.3.1)
Press the [S] key
An acoustic signal sounds and the
measurement incertainty is displayed
briefly.
The balance returns to weighing mode
16.2.2 Take over measurement deviation
In the enhanced menu navigate to <4.
M.E.H.> and select the setting
Take over the measurement incertainty from
the adjustment or the adjustment test with
external adjustment weight
To Next Page
Loading...
Need help?
General
