KERN PES 620-3M

TPES-B_TPEJ-B-BA-e-2319 84
19.7 Data input
• Pay attention to upper and lower case letters when entering data
• Wait for the balance to respond between two entries
19.7.1 Input format 1
Input format:
1
2
3
4
C1
C2
CR
LF
Example of permanent output:
 Input: O0
Zeroing / taring, data output:
C1
C2
Code (C1)
Code (C2)
Significance
T
Sp
54H
20H
Set to zero/taring
O
0
4FH
30H
End output
O
1
4FH
31H
Permanent output
O
2
4FH
32H
Continuous output only for stable values
(interruption of output for unstable
values).
O
3
4FH
33H
Press [PRINT] key for one-time output
O
4
4FH
34H
Automatic output when weighing plate is
loaded again and value is stable
O
5
4FH
35H
One-time output whenever value is stable
(no output for unstable values)
O
6
4FH
36H
Continuous output for unstable values
(interruption of output when value is
stable → stable value is output once)
O
7
4FH
37H
Press [PRINT] key for one-time output at
stable values (no output at unstable
values)
O
8
4FH
38H
Single output
O
9
4FH
39H
One-time output at stable value
O
A
4FH
41H
Output in any preset time interval
O
B
4FH
42H
Output in any preadjusted time interval
when value is stable (interruption of the
output at instable values)
*Sp = space