KERN PES 620-3M

67 TPES-B_TPEJ-B-BA-e-2319
 Various messages are shown on the
display one after another: <Aut. CAL> →
<WAIt> → <CH. 0> → <CH. F.S.> →
<buSy> → <End>
…
 When the balance returns to the weighing
mode, the internal adjustment is finished
17.2 Adjustment test with internal weight
• This function is only available for the following weighing system: PEJ
• Cancel the process by pressing the [PRINT] key
 Unload weighing plate
 Select <7. CA. 2> in the menu (navigation
in the menu: see chapter 8.3)
 Press the [S] key
 The balance returns to weighing mode
 Press the [CAL] key to start internal
adjustment test.
 Various messages are shown on the
display one after another: <t. Int> → <t.
0> → <t. F.S.> → <dIFF>
…