KERN PES 620-3M User Manual

TPES-B_TPEJ-B-BA-e-2319 90
19.9.2 Change communication settings
The communication settings can only be made after the interface having
been activated (see chap. 19.9.1).
Set output condition:
 Navigate to <61.oc.> in the menu and
select the desired setting.
0
End output
1
Permanent output
2
Continuous output only for stable values
(interruption of output for unstable values).
3
One-time output when [PRINT] key is pressed
4
Automatic output (One-time output when the
value is stable. The next output for another
sample occurs when the reading is stabilised to
less than or equal to zero by unloading, zero
adjustment or tare subtraction).
5
One-time output whenever value is stable (no
output for unstable values)
6
Continuous output for unstable values
(interruption of output when value is stable 
stable value is output once)
7
Press [PRINT] key for one-time output at stable
values (no output at unstable values)
A
Output in any preadjusted time interval → see
chap. 19.9.3
b
Output in any preadjusted time interval when
value is stable (interruption of the output at
instable values) → see chap. 19.9.3

KERN PES 620-3M Specifications

General

Brand	KERN
Model	PES 620-3M
Category	Scales
Language	English