KERN PES 620-3M

TPES-B_TPEJ-B-BA-e-2319 44
13.1 Selection of weighing function with tolerance range
13.2 Set distinction condition
The distinction condition defines whether the evaluation of weight values is
performed only if there are stable weight values or continuously (in case of fluctuating
/ non-stable weighing values). The continuous assessment of weight values enables
you to follow in real time on the display during dynamic weighing processes (e.g.
when filling a container) whether your sample is within the tolerance limits.
13.3 Setting the distinction range
The differentiation range determines the weight value from which the scale starts to
evaluate this value. If the entire range is set, the balance starts at 0 g. If 5d is set, the
evaluation for the weighing systems is carried out according to the following table:
Model
Minimum weight for assessment
to 620 g
0,005 g
from 2200 g to 6200 g
0,05 g
from 15 kg to 31 kg
0,5 g
 In the menu navigate to <22. Li.> and select
Distinction Area (Navigation in the menu: see chap.
8.3)
0
+5 d or more
1
Total range
 In the menu select <2. SEL 2> (navigation in the
menu: see chap. 8.3)
If the add-on function needs to be used at the same
time, select <2. SEL 3>.
 In the menu navigate to <21. Co.> and select
distinction condition (Navigation in the menu: see
chap. 8.3)
1
Always
2
Only with steady weighing value