93 TPES-B_TPEJ-B-BA-e-2319
Start the interval output:
Display changes to <StArt>
The balance returns to weighing mode
The clock symbol appears on the display
to indicate the interval output
To finish the interval output, press the [PRINT] key again
19.10 Output functions
19.10.1 GLP-compliant data output
Enable / disable ISO / GLP / GMP compliant log:
Setting the output language:
Output of the GLP-compliant weighing log:
In the menu select <E2. od. 1>
In the menu select <E. GLP 1>
In the menu navigate to <E2. od.> and
select setting
In the menu select <E. GLP 1>
In the menu navigate to <E3. P.F.> and
select setting
To Next Page
Loading...
Need help?
General
