KERN PES 620-3M

51 TPES-B_TPEJ-B-BA-e-2319
13.9.2 Differential values
For the distinction method setting with absolute values <24. tYP. 2> (see
chap. 13.5)
at <23. Pi.> = 1 or 2:
Limit 2
+
→ H. SEt
Reference value
TOL ✓
→ r. SEt
Limit 1
-
→ L. SEt
at <23. Pi.> = 3 or 4:
Limit 4
+
→ L4 SEt
Limit 3
→ L3 SEt
Reference value
TOL ✓
→ r. SEt
Limit 2
→ L2 SEt
Limit 1
-
→ L1 SEt
Actual value setting method:
 When the balance is in the measuring
mode, hold down the [S] key for about 2
seconds.
 Release the [S] key when <r. SEt> is
displayed
 Last reference value stored for the target
weight appears and flashes on the display
 Place reference sample (target weight) on
the weighing plate
 Press the [F] key to save the reference
value.