TPES-B_TPEJ-B-BA-e-2319 52
An acoustic signal sounds and the value
of the reference sample is displayed
briefly
Remove reference sample
<L SET> or <L1 SEt> is displayed
Last difference to reference sample
flashes on the display
Place the reference sample for the
tolerance limit on the weighing plate
Press the [F] key to save the reference
value.
An acoustic signal sounds and the
difference of the reference sample is
displayed briefly
Remove reference sample
If the number of tolerance limits is more than 1:
The display shows <H. SEt> (or <L2 SEt>
… <L4 SEt>)
Last difference to reference sample
flashes on the display
To Next Page
Loading...
Need help?
General
