53 TPES-B_TPEJ-B-BA-e-2319
Place the reference sample for the
tolerance limit on the weighing plate
Press the [F] key to save the reference
value.
An acoustic signal sounds and the
difference of the reference sample is
displayed briefly
Remove reference sample
When the balance is in the measuring
mode, hold down the [S] key for about 2
seconds.
Release the [S] key when <r. SEt> is
displayed
Last reference value stored for the target
weight appears and flashes on the display
Press the [TARE/ZERO] key
<0 g> flashes on the display
Enter reference value (target weight)
(Numeric entry: see chap. 3.3.1)
To Next Page
Loading...
Need help?
General
