TPES-B_TPEJ-B-BA-e-2319 54
An acoustic signal sounds and the
entered value is displayed briefly (in this
example: Weight value)
<L SET> or <L1 SEt> is displayed
Last difference to reference sample
flashes on the display
Enter difference of the target weight as
described above
If the number of tolerance limits is more than 1:
The display shows <H. SEt> (or <L2 SEt>
… <L4 SEt>)
Last difference to reference sample
flashes on the display
Enter difference of the target weight as
described above
13.10 Weighing the samples
Put the weighing goods on the weighing
plate
Evaluation of the value is shown on the
display
To Next Page
Loading...
