TPES-B_TPEJ-B-BA-e-2319 38
2. Select weighing application for density determination
Select weighing application <1. SEt 5>
(selection see chap. 9.4)
Navigate to <11. MEd.> and select
medium (Navigation in menu: see chap.
8.3)
Press the [S] key to save settings
4. Set water temperature or specific density
Press and hold the [TARE/ZERO] key.
When 0 (water) is selected:
Display changes to <d t> and flashes
Release the [TARE/ZERO] key.
Press the [TARE/ZERO] key to set the
water temperature.
• The water temperature must be between 0.0 °C and 99.9 °C
• The specific density must be between 0.0001 and 9.9999
To Next Page
Loading...
Need help?
General
