LXI:IDENtify[:STATe] {OFF|ON}
LXI:IDENtify[:STATe] ?
Enables (On) or disables (Off) the LXI Identify Indicator on the front panel display.
Parameter Typical return
{OFF|ON}
Default: OFF
0 (OFF) or 1 (ON)
Enables the LXI Identify Indicator:LXI:IDEN[:STAT] ON
– You can press the "Local" key or send *RST to turn off the LXI Identify Indicator.
LXI:MDNS:ENABle {OFF|ON}
LXI:MDNS:ENABle?
Enables (On) or disables (Off) the multicast Domain Name System (mDNS), which provides the capabilities of a DNS
server for service discovery in a small network that without a DNS server.
Parameter Typical return
{OFF|ON}
Default: ON
0 (OFF) or 1 (ON)
Enables mDNS:LXI:MDNS ENAB ON
– This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instrument Preset
(SYSTem:PRESet).
– This parameter is set to its default value when the instrument is shipped from the factory and after
SYSTem:SECurity:IMMediate.
LXI:MDNS:HNAMe[:RESolved]?
Returns the resolved (unique) mDNS hostname in the form "K-<model number>-<serial>-N", where <serial> is the
last 4 digits of the instrument's serial number. The N is an integer appended if necessary to make the name unique.
The desired name may be truncated, if necessary, to make room for the appended integer.
Parameter Typical return
(none) "K-DAQ970A-yyyyy", where yyyyy is the last four digits of the serial number.
Returns the resolved mDNS hostname:
LXI:MDNS:HNAMe:RESolved?
Typical response: "K-DAQ970A-0010"
160
Keysight DAQ970A/DAQ973A Programming Guide
2 SCPI Programming
To Next Page
Loading...
Need help?
General
