Keysight Technologies N6700 User Manual

4 Keysight N6700 User’s Guide
In this Book
Specific chapters in this manual contain the following information:
 Quick Reference – Chapter 1 is a quick reference section that helps
you quickly become familiar with your Keysight N6700 Modular
Power System. It describes the differences between the various
modules in the power system.
 Installation – Chapter 2 describes how to install your power system.
It describes how to connect various loads to the output. It discusses
remote sensing as well as parallel and series operation.
 Getting Started – Chapter 3 describes how to set the voltage,
current, over-voltage protection, and turn on the output. It also
describes how to configure the remote interface.
 Operating the Power System – Chapter 4 describes how to use the
advanced features of the power system using the front panel menus
and the corresponding SCPI commands.
 Specifications – Appendix A describes the mainframe characteristics.
 Using the Digital Port – Appendix B describes how to configure and
use the digital port on the back of the instrument.
 Power Allocation – Appendix C describes the power allocation
function, which applies to power system in which the combined
ratings of the power modules exceed the power rating of the
mainframe.
 Output On/Off Synchronization – Appendix D discusses output
on/off synchronization, which lets you accurately synchronize output
turn-on sequences across multiple mainframes.
 Source Operating Modes – Appendix E discusses operating mode
information for all power modules.
For complete details on the SCPI (Standard Commands for
Programmable Instruments) commands, refer to the N6700
Programmer’s Reference Help file included on the Keysight N6700
Product Reference CD. This CD-ROM is shipped along with your
instrument.
NOTE
You can contact Keysight
Technologies at one of the following telephone
numbers for warranty, service, or technical support information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Keysight in your
country or specific location:
www.keysight.com/find/assist
Or contact your Keysight Technologies Representative.

Keysight Technologies N6700 Specifications

General

Brand	Keysight Technologies
Model	N6700
Category	Power Supply
Language	English