Turning the Unit On ........................................................................ 46
Selecting an Output Channel ......................................................... 46
Entering an Output Voltage Setting .............................................. 46
Entering a Current Limit Setting .................................................... 47
Enabling the Output ....................................................................... 47
Using the Front Panel Menu .......................................................... 48
Connecting to the Interfaces ......................................................... 50
Communicating Over the LAN ....................................................... 57
Securing the Interfaces .................................................................. 59
This chapter describes how to get started using your power system. It
discusses turning the unit on, using the front panel controls, and
navigating the front panel command menu. A map of the front panel
menu structure is found in Chapter 1.
This chapter also contains information on how to configure the three
remote interfaces that are provided on the back of the instrument.
Detailed information on configuring the remote interfaces is included in
the Keysight Technologies USB/LAN/GPIB Interfaces Connectivity
Guide, which is available on the Automation-
Ready CD included with this
product.
To Next Page
Loading...
Need help?
General
