4
Operating the Power System
Programming the Output ............................................................... 62
Synchronizing Output Steps .......................................................... 68
Programming Output Lists ............................................................. 72
Making Measurements ................................................................... 77
Using the Digitizer .......................................................................... 79
Using the Protection Functions ..................................................... 87
External Data Logging .................................................................... 91
System-Related Operations ........................................................... 95
This chapter contains examples on how to operate your power system
from the front panel and over the remote interface using SCPI
commands.
For complete details on the SCPI (Standard Commands for
Programmable Instruments) commands, refer to the Programmer’s
Reference Help file included on the Keysight N6700 Product Reference
CD. This CD-ROM is shipped along with your instrument.
The simple examples discussed in this chapter show you how to
program:
Output voltage and current functions
Output triggers
Measurement functions
Measurement triggers
Protection functions
System functions
Refer to Appendix B for information about using the Digital Port on the
back of your instrument.
Refer to Appendix C for information about using the power allocation
function.
To Next Page
Loading...
Need help?
General
