6 Keysight N6700 User’s Guide
A – Specifications ........................................................................................................ 99
Keysight N6700B, N6701A, N6702A MPS Mainframes .............. 100
B – Using the Digital Port .......................................................................................... 103
Digital Control Port ...................................................................... 104
Configuring the Digital Control Port ............................................ 105
C – Power Allocation ................................................................................................. 109
Power Limit Operation ................................................................. 110
Module Power Allocation ............................................................. 111
D – Output On/Off Synchronization ........................................................................... 113
Synchronizing Output Turn-on Delays ........................................ 114
Synchronizing Multiple Mainframes ............................................ 117
Operation ...................................................................................... 118
E – Source Operating Modes ..................................................................................... 119
Single Quadrant Operation .......................................................... 120
Keysight N678xA Multi-Quadrant Operation .............................. 122
This manual describes firmware revision D.03.08 and up. Go to
http://www.keysight.com/find/N6700firmware
if you need to download
this or any later versions of the firmware. Information on how to install
the firmware is available on the web site.
Refer to “Instrument Identification” in chapter 4 to view the firmware
version that is currently installed in your mainframe.
Updated versions of this manual are also posted on the web. Go to
http://www.keysight.com/find/N6700
to get the latest version of the
manual.