Keysight Technologies N9322C - Page 135

127
Key Reference
Meas
a. Res BW is set to 100 kHz and Fail Mask is set to Rel.
a. Res BW is set to 100 kHz, Fail Mask is set to Rel, and Abs Stop and
Rel Stop are both set to Couple.
Tabl e 3 Offsets & Limits Defaulted for 802.11a and HiperLAN/2 Radio Standards
a
Offset Start
Freq
(MHz)
Stop
Freq
(MHz)
Abs
Start
(dBm)
Abs
Stop
(dBm)
Abs
Couple
Rel
Start
(dBc)
Rel Stop
(dBc)
Rel
Couple
Meas
BW
A. On 9.00 11.00 16.00 -4.00 Man 0.00 -20.00 Man 1
B. On 11.00 20.00 -4.00 -12.00 Man -20.00 -28.00 Man 1
C. On 20.00 30.00 -12.00 -24.00 Man -28.00 -40.00 Man 1
D. On 30.00 50.00 -24.00 -24.00 Couple -40.00 -40.00 Couple 1
E. Off 50.00 100.00 -24.00 -24.00 Couple -40.00 -40.00 Couple 1
Tabl e 4 Offsets & Limits Defaulted for 802.11b Radio Standard
a
Offset Start Freq
(MHz)
Stop Freq
(MHz)
Abs Start
(dBm)
Abs Stop
(dBm)
Rel Start
(dBc)
Rel Stop
(dBc)
Meas
BW
A. On 11.00 22.00 -10.00 -10.00 -30.00 -30.00 1
B. On 22.00 50.00 -30.00 -30.00 -50.00 -50.00 1
C. Off 50.00 70.00 -30.00 -30.00 -50.00 -50.00 1
D. Off 70.00 90.00 -30.00 -30.00 -50.00 -50.00 1
E. Off 90.00 100.00 -30.00 -30.00 -50.00 -50.00 1
Offset Select the offset pairs (upper and lower) that the softkeys
will affect, and displays the memory selection menu from A
to E (the analyzer can store up to 5 sets of values for Start
Freq, Stop Freq, Sweep Time, Res BW, Meas BW, Abs Start, Abs
Stop, etc.). Press Offset to select the letter of the desired
offset is underlined. Only one selection at a time is shown on
this key label.
Key access: Meas > SEM > Offset/Limits