Keysight B Series User Manual

108 Keysight N9938-90003 User’s Guide
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
The graphic above shows an SA display with markers.
Carrier with 5 kHz frequency modulation and deviation of 1 kHz.
In this Chapter
“Frequency Range” on page 110
“Radio Standard” on page 112
“Channel Selection” on page 113
“Reverse Swap” on page 115
“Scale and Units” on page 115
“External Gain” on page 116
“Attenuation Control” on page 117
“Preamplifier Control (Opt 235)” on page 118
“Check for Compressed Measurements” on page 118
“Field Strength Measurements” on page 119
“Using the Antenna/Cable Editor” on page 120
“Source Tracking Offset and Offset Reversal” on page 123
“Tune & Listen (AM/FM)” on page 124
“Independent Source/Tracking Generator ” on page 126
“Resolution Bandwidth (Res BW)” on page 128
“Video Bandwidth (Video BW)” on page 128
“Sweep Type” on page 129
“IF Output” on page 130
“Sweep Acquisition” on page 132
“Very Long Sweep Times” on page 134
“Zero Span Measurements” on page 134
“Triggering” on page 136
“FFT Gating (Opt 238)” on page 139
“Single / Continuous / Restart” on page 141
“Points ” on page 141
“Trace Display States (SA Mode)” on page 141
“Average Type” on page 142

Keysight B Series Specifications

General

Brand	Keysight
Model	B Series
Category	Analytical Instruments
Language	English