Keysight B Series User Manual

Keysight N9938-90003 User’s Guide 31
Preparing for Initial Use of Your New FieldFox
Take the FieldFox Tour
Right Side Panel
Connector Description Learn More:
Ethernet cable connector to read trace data using the FieldFox Data Link
Software and connect to the FieldFox remotely.
Download the latest version of the software at:
www.keysight.com/find/fieldfoxsupport
“LAN Settings” on
page 254
IF Out used in SA mode for external signal processing. “IF Output” on
page 130
Frequency Reference Source Output
Trigger Output (ERTA mode).
Chapter 24, “ERTA
(Extended Range
Transmission Analysis)
Mode - Option 209”, on
page 533
Secure Digital slot. Use to extend the memory of the FieldFox. “Saving and Recalling
Files” on page 266
The mini-USB port can be connected to your PC’s standard USB port to
send SCPI commands.
IMPORTANT! It is recommended that only USB
certified cables are used with the FieldFox.
Chapter 30, “Using the
Mini-USB Port to send
SCPI Commands and
Queries”, on page 711
Two standard USB connectors used to connect a power sensor for Power
Meter Mode. Also used to save files to a USB flash drive.
IMPORTANT! It is recommended that only USB
certified cables are used with the FieldFox.
“Saving and Recalling
Files” on page 266

Keysight B Series Specifications

General

Brand	Keysight
Model	B Series
Category	Analytical Instruments
Language	English