Keysight B Series - Page 267

Keysight N9938-90003 User’s Guide 267
File Management
Saving and Recalling Files
Saving MATLAB files
Figure 10-1 I/Q Analyzer Mode (IQA) MATLAB File Save
Insert only ONE USB flash drive in the FieldFox when saving or copying
files.
If you have Option 351 I/Q Analyzer option, you can directly save your data
as MATLAB files (*.mat). Refer to Chapter 11, “ IQ Analyzer (IQA) – Option
351”, on page 259 and to Chapter 10, “File Management”, on page 265.
If you have the FieldFox’s Remote Server mode (89600 VSA software
connectivity), you can use the VSA software to capture and record your
data as MATLAB files (*.mat). Learn more about FieldFox and 89600 VSA
software, refer to Chapter 16, “Remote Server Mode (Requires SA
Hardware/SA Option 233)” and to
http://rfmw.em.keysight.com/wireless/helpfiles/89600B/WebHelp/89600
.htm.