Keysight N774xC Series Multiport Power Meter Programming Guide 105
Error Codes 5
-420 “Query UNTERMINATED”
[Indicates that a condition causing an UNTERMINATED Query error occurred (see IEEE 488.2,
6.3.2.2); for example, the device was addressed to talk and an incomplete program message was
received.]
-430 “Query DEADLOCKED”
[Indicates that a condition causing an DEADLOCKED Query error occurred (see IEEE 488.2,
6.3.1.7); for example, both input buffer and output buffer are full and the device cannot continue.]
-440 “Query UNTERMINATED after indef resp”
[Indicates that a query was received in the same program message after an query requesting an
indefinite response was executed (see IEEE 488.2, 6.5.7.5).]
Error
Number String
To Next Page
Loading...
