Keysight N774 C Series

30 Keysight N774xC Series Multiport Power Meter Programming Guide
3 Instrument Setup and Status
1Not used 2
0 (LSB) Operation Complete 1
Example: *ESR? -> 21
Command: *IDN?
Syntax: *IDN?
Description: The IDeNtification query *IDN? gets the instrument identification over the interface.
Parameters: none
Response: The instrument identification
For example:
MMMMMMMM
mmmm
ssssssss
rrrrrrrrrr
manufacturer, for example Keysight Technologies
instrument model number (for example N7745C)
serial number
firmware revision level
Example: *IDN? -> Keysight Technologies,N7745C,DE42100168
Command: *OPC
Syntax: *OPC
Description: Generates the OPC message in the standard event status register when all pending overlapped operations have been
completed.
Parameters: none
Response: none
Example: *OPC