Kinco CD2S Series - CD2 S Driver Interfaces and Wiring; Interface Overview and Pinouts

13
Chapter 3 Interfaces and Wiring of CD2S Driver
3.1 Interfaces of CD2S Driver
3.1.1 Interfaces
Table 3-1 Interfaces of CD412S/CD422S/CD432S/CD622S
Interface
Driver
Symbol
Function
X1
CD412S
CD422S
CD432S
CD622S
COMI
Common terminal of digital inputs
DIN1～DIN7
Digital inputs. Valid signal:12.5V～24V.Invalid signal:<5V
OUT1+
Digital output 1+
OUT1-
Digital output 1-
OUT2+
Digital output 2+
OUT2-
Digital output 2-
OUT3
Digital output 3
OUT4
Digital output 4
COMO
Common terminal of digital outputs
GND
Ground signal
ENCO-Z
Motor encoder output interface
ENCO-/Z
ENCO-B
ENCO-/B
ENCO-A
ENCO-/A
AIN1
Analog signal input 1. Input impedance: 200 K
GNDA
Ground signal of analog
AIN2
Analog signal input 2. Input impedance: 200 K
GNDA
Ground signal of analog
PUL+
Pulse or positive pulse
interface (+)
Input voltage range：3V～24V
PUL-
Pulse or positive pulse
interface (-)
DIR+
Direction or negative pulse
interface (+)
DIR-
Direction or negative pulse