Chapter 4 Digital Operation Panel
4.1 Introduction
A digital operation panel functions to set user parameters in a servo driver, execute instructions, or display
parameters. Table 4-1 describes all display contents and functions of the digital operation panel.
Table 4-1 Display contents and functions of a digital operation panel
Indicates whether data is positive or negative. If it is on, it indicates negative; otherwise it indicates
positive.
1. Distinguishes the current object group and the address data in this object group during
parameter settings.
2. Indicates the higher 16 bits of the current 32-bit data when internal 32-bit data is displayed in
To Next Page
Loading...
