5. When an implement is attached to
the tractor, pull the position control
T11O452A
(1) Position Control Lever (2) Lock Bolt
(3) Lower Link (A) Lifting (B) Lowering
M55O547A
lever to the rear side of the tractor
to lift the implement.
6. Increase slowly the engine RPM
from idle speed to medium speed.
(1) Hand Throttle Lever
" "Slow" "Fast"
7. Release the parking brake.
(1) Parking Brake Lever (2) Brake Pedals
(3) Pedal Interlock
(A) Depressing (B) Pressing Down
M55O4M1A
To Next Page
Loading...
