(1) Turn Signal Lamp (FRT)
(2) Mounting Bolt
(3) Turn Signal Lamp (FRT) Bulb
1. Remove the cap and unscrew the
mounting bolts to remove the front
turn signal lamp assembly.
2. Turn the bulb body counterclock-
wise to remove it.
3. Remove the bulb by pressing it
down lightly and install a new bulb.
Fit the socket to the grooves and
turn it clockwise.
(1) Licence Plate Lamp
(2) Mounting Bolt
(3) Licence Plate Lamp Bulb
1. Remove the cover and unscrew
the bolt. Then, turn the bulb while
pressing it down lightly to remove
it. Install a new bulb.
M55O7A4A
T11O724A
Do not touch the bulb if it is
still illuminated or right after
it is turned off. You can be
burned by the hot bulb.
For some bulbs which require
-
cess, contact your local KIOTI
Dealer.
Do not touch the illuminating
The bulb life can be shortened
moisture, or the bulb even can
be broken. Clean it with soft
cloth.
The halogen bulb contains
-
-
ing it. Therefore, never use a
bulb if it is scratched or was
•
•
•
•
CAUTION
To Next Page
Loading...
