SANARIUM B, S
PAGE 11
50701206/02.18
7. Controller
7.4. Touchscreen - Section 1: Cabin control with door contact
switch (optional)
Symbol: Display/function:
The cabin control function for operating the controller via the Klafs Sauna
app is only available for cabins that have WLAN installed and activated.
' See page 14 for the WLAN function.
Cabin control.
. Function for operating the controller via the Klafs Sauna app, e.g. with
a smartphone.
. Klafs safety concept ASC.
Performs a visual precheck of the inside of the cabin to ensure that there are
no flammable objects near the sauna heater or the infrared heater.
Notice: The cabin can only be started via the Klafs Sauna app if this visual
check has been carried out after the last sauna session.
' Standby mode. See page 21 for the function for remotely controlling
the controller via the Klafs Sauna app.
Backlit ring is flashing:
The backlit ring will start flashing after you have pressed the cabin control
symbol. Open the sauna door within the next 30 minutes and check the
heaters for flammable objects, removing any if necessary. The backlit ring
will be permanently lit after closing the sauna door.
The cabin can now be started via the Klafs Sauna app.
Backlit ring is permanently lit:
The sauna cabin has been checked.
A bathing mode can be started via the Klafs Sauna app.
Backlit ring is off:
If the sauna door is opened after the visual precheck and before the session
has started, the backlit ring will go out. The cabin can no longer be
operated via the Klafs Sauna app.
If the sauna door is opened during the remote-control standby period and
the cabin temperature is less than 40 °C, the backlit ring will go out and
the controller must be reset.
The cabin cannot be started via the KLAFS Sauna app and bathing
parameters cannot be changed if a setting has been changed on the
controller or the sauna door has been opened during the remote-control
standby period.
To Next Page
Loading...