Klafs 18033 - Evaporator - Change the Scent Container; Evaporator - Scent Line to the Evaporator Tube

SANARIUM B, S
PAGE 61
50701206/02.18
12. Cleaning and maintenance
12.5. Evaporator - Change the scent container
The scent container (1) is located on the control
panel next to the evaporator.
. Shake the scent container well before
replacing it.
1. Remove the hose from the empty scent
container.
2. Remove the empty scent container from the
bracket.
3. Remove the cover from the scent container.
4. Place the new scent container in the bracket.
5. Insert the hose into the scent container until it
reaches the bottom of the container.
1
12.6. Evaporator - Scent line to the evaporator tube
1. Check the scent line between the scent
container and the scent pump (2), replace if
faulty.
2. Check the scent line between the scent pump
and the T-piece on the evaporator tube (3),
replace if faulty.
3. Check and clean the scent inlet on the
T-piece on the evaporator tube (4) - to do
this, unscrew the coupling nut and the scent
inlet.
2
4
3