EasyManua.ls Logo

Klafs 18033 - Climate Manager (Optional); Vent Flap for Airing and Ventilating the Cabin (Optional)

Klafs 18033
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SANARIUM B, S
PAGE 50
50701206/02.18
10. Custom settings
10.12. Climate Manager (optional)
Suitable scents
Do not use any scents containing eucalyptus when using the Climate Manager.
Use original Klafs scents only.
Operation LED (1) on the Climate Manager.
BCD switch (2) on the Climate Manager.
Adjust the air flow rate inside the sauna cabin.
2
1
Position Effect:
0 d minimum air flow rate
d maximum energy savings
9 d maximum air flow rate
d low energy savings
10.13. Vent flap for airing and ventilating the cabin (optional)
Correct airing and ventilation ensure an optimum climate.
The Klafs vent wall with adjustable vent flap (optional) allows you to regulate the air flow and
volume.
Ventilation: Heating mode
Vent flap, level 1
There is only a low air flow at this setting.
Ventilation: Sauna mode
Vent flap, level 4
Session with maximum number of users.
There is maximum air flow at this setting.
1
4
Level
The higher the air flow rate, the better the sauna
climate. Intermediate levels can be selected
depending on the number of users.
However, you must distinguish between Sauna,
SANARIUM or InfraPLUS (optional) mode.
Sauna:
Vent flap, level 4 to 3.
SANARIUM:
Vent flap, level 1 to 2.
InfraPLUS:
Vent flap, level 1 to 2.
Set the vent flap to level 4 during
final drying.

Table of Contents

Other manuals for Klafs 18033