Klafs 18033 - Evaporator Setup and Commissioning

SANARIUM B, S
PAGE 36
50701206/02.18
9. Operation
9.9. SANARIUM B - Commissioning the evaporator
Filling the evaporator
2
3
1
Only fill the evaporator when it is
cold.
Fill with the water quantity required
for the intended bathing time.
Do not put any additives into the
water.
1. Close the drain valve (1) - turn the drain valve
to the left.
2. Fill the evaporator on the filling unit (2) with
water.
. The filling quantity is shown on the level
indicator (3).
Adding scent to the aroma cup
1. Remove the aroma cup (4) from the steam
outlet (6) with the aroma fork (5).
4
6
5
Risk of fire!
Do not fill the aroma cup on the
heater.
2. Pour diluted scent into the aroma cup.
3. Place the aroma cup (4) back on the steam
outlet (6).