Klafs 18033 - Setting InfraPLUS Intensity

SANARIUM B, S
PAGE 43
50701206/02.18
10. Custom settings
10.4. Setting InfraPLUS (optional)
Changing the intensity
1. Press the symbol (1) or (2).
The intensity bar scale (2) flashes.
2. Set the desired intensity by pressing the
+/- symbols (3).
3. Apply the set intensity by pressing the
OK symbol (4).
. The controller will automatically cancel input
mode and retain the existing setting if the
altered setting is not confirmed by pressing
OK within five seconds.
1
4
3
2