Klafs 18033 - UR Button, With;Without IR Receiver

SANARIUM B, S
PAGE 31
50701206/02.18
9. Operation
9.6. Interior display (optional), with SaunaPUR button,
with/without IR receiver
Program end final drying
SaunaPUR bathing mode LED active/inactive.
SaunaPUR button. Start/stop the bathing mode.
Seven-segment display.
Sauna - time
Sauna - actual temperature
Temperature for SaunaP
UR bathing mode not yet reached
or not available using IR remote control function.
Target temperature
Remaining bathing time
Switch status on/off
IR-receiver LED.
End of program
Target humidity
SANARIUM - actual humidity
Displayed when operating via
remote control (optional).
Please see delivery documents for scope of supply.
Display function
The four-digit seven-segment display alternates between the following:
d Time
d Actual temperature
d Actual humidity
d Target humidity
d Target temperature
d Remaining bathing time
d Switch status
d End of program.
Function of the SaunaP
UR button
Start or stop the P
UR bathing mode.
. To start the P
UR bathing mode, the Sauna bathing mode must be started and the cabin must reach
the preset temperature.
Continued on the next page